The MO2-10+Air mobile oxygen concentrator is additionally equipped with a compressor for supplying compressed air. This is necessary when using the concentrator in healthcare facilities where centralized oxygen supply is not available.
Fully self-contained unit for the production of medical oxygen and compressed air with the ability of attaching and connecting backup oxygen 10 L cylinders
The MO2-10+Air Oxygen Concentrator can be directly connected to breathing equipment as a source of oxygen and compressed air
For the production of oxygen and compressed air, only a power supply connection (230 V, 50 Hz) is required
The low noise level of the concentrator allows you to operate it directly in the OR, ICU or other room with a permanent staff presence
The kit can be supplied with:
— a set for oxygen inhalation;
— a set for vacuum aspiration.
Flow rate, L/min 1-10
Purity (10 L/min), % 93±3 Outlet pressure, psi 5 Compressed air flow rate, L/min 50 Electrical Requirement 20 V ± 10%, 50 Hz ± 10% Max. current, A 8 Max. power, W 1700 Sound level, dB ≤50 Dimension, mm 660х650х930 Net weight, kg 115 Humidity, % up to 95 (non-condensing) Operating temperature range, °C 5 to 40
MO2-20
The MO2-20 Mobile Oxygen Concentrator is recommended for use in healthcare facilities where centralized oxygen supply is not available. It can be used as an oxygen supply system for ventilators and anesthesia equipment.
Fully self-contained unit for the production of medical oxygen with the ability of attaching and connecting backup oxygen 10 L cylinders
The MO2-20 Oxygen Concentrator can be directly connected to breathing equipment as a source of oxygen
For the production of oxygen only a power supply connection (230 V, 50 Hz) is required
The low noise level of the concentrator allows you to operate it directly in the OR, ICU or other room with a permanent staff presence
Type mobile Flow rate, L/min 2-20 Purity (20 L/min), % 93±3 Outlet pressure, psi 5 Electrical Requirement 230 V ± 10%, 50 Hz ± 10% Max. current, A 8 Max. power, W 1560 Sound level, dB ≤60 Dimension, mm 660х650х930 Net weight, kg 100 Humidity, % up to 95 (non-condensing) Operating temperature range, °C 5 to 40
MSO2-20
The MSO2-20 Oxygen Concentrator can be used as an oxygen supply system for ventilators and anesthesia equipment. If desired, the concentrators can be combined into a modular system.
High level of safety: in case of failure of one or more modules, the remaining modules continue to work. This gives additional time to repair the system and saves oxygen generation
Ability to upgrade modules
Automation system monitors the uniformity of operation of all modules, not allowing any of them to work more hours than the others. This ensures an evenly distributed workload on the equipment
Quick payback and further savings on oxygen supplies. The high cost is compensated within 2-3 years (compared to systems using compressed oxygen). At the end of this period, you continue to receive oxygen, paying only for electricity and consumables. It comes out cheaper than refueling cylinders or a gasifier
Cylinder filling system (optional)
Mobile version in a container (optional)
Type stationary (mobile version in a container*) Flow rate, L/min 2-20 Purity (20 L/min), % 93±3 Outlet pressure, psi 5 Electrical Requirement 230 V ± 10%, 50 Hz ± 10% Max. current, A 8 Max. power, W 1560 Sound level, dB ≤60 Dimension, mm 660х650х930 Net weight, kg 100 Humidity, % up to 95 (non-condensing) Operating temperature range, °C 5 to 40
МО2-10 Tr
The MO2-10 Tr Portable Oxygen Concentrator is designed for use in ambulances. The concentrator is used to power ventilators, as well as anesthesia and respiratory equipment..
⦁ Constant working pressure of 4.5 bar guarantees safe use of breathing equipment and/or transport incubators
⦁ Minimal maintenance costs
⦁ Changes to the oxygen distribution system in the ambulance are not required
MORE DETAILED
The MO2-10 Tr Portable Oxygen Concentrator is designed for use in ambulances. The concentrator is used to power ventilators, as well as anesthesia and respiratory equipment..
⦁ Constant working pressure of 4.5 bar guarantees safe use of breathing equipment and/or transport incubators
⦁ Minimal maintenance costs
⦁ Changes to the oxygen distribution system in the ambulance are not required
MORE DETAILED
ReOxy
ReOxy is a respiratory therapy device that uses gas mixtures with different oxygen concentrations based on Self-Regulated Treatment (SRT)® technology and allows you to automatically select an individual level of hypoxic load.
ReOxy therapy is intended for patients with cardiovascular, nervous, and respiratory system diseases, patients requiring post-COVID rehabilitation, patients requiring adaptation to physical activities and improvement of cognitive abilities, as well as for patients with sleep disorders, to help with reduced performance and fatigue.
MORE DETAILED
ReOxy is a respiratory therapy device that uses gas mixtures with different oxygen concentrations based on Self-Regulated Treatment (SRT)® technology and allows you to automatically select an individual level of hypoxic load.
ReOxy therapy is intended for patients with cardiovascular, nervous, and respiratory system diseases, patients requiring post-COVID rehabilitation, patients requiring adaptation to physical activities and improvement of cognitive abilities, as well as for patients with sleep disorders, to help with reduced performance and fatigue.